Bush Hog DSP10

Performance Features

Available in 8-foot, 10-foot, and 12-foot widths.
Optional tilt axle removes material on an angle for sloping, terracing and ditching.
DSP scrapers are designed for 70 to 125 horsepower tractors
Replaceable wear plates on the sides.

Model	DSP10
Horsepower Rating	70 to 125
Transport Width	121-inches
Working Width	120 3/16-inches
Capacity	2 1/4 cu. yds.
Weight without material in Weight Box
Tilt Axle	1645-lb
No Tilt Axle	1525-lb
Weight of Material in Weight Box	760-lb
Depth of Box	39-inches
Maximum Cutting Depth	5-inches below grade
Dump Clearance	21-inches
Maximum Tilt Depth To the Right	7 5/8-inches
Maximum Tilt angle	3 1/2°
Tongue Construction	4-inches x 4-inches x 1/4-inch tubing
Side Plate Construction	3/8-inch x 24 5/16-inches high x 39 3/4inches deep
Moldboard Construction	1/4-inch x 24 1/4-inches high when formed
Cutting Edge	1/2-inch x 6-inches reversible & replaceable
Cutting Edge Reinforcement	3-inches x 3-inches x 5/16-inch angle plus a 1/4-inch mold board = 9/16-inch at the cutting edge.
Tires	New 9.5l x 15 8 PLY RIB TL on Rim 5 with 5.5 BHC
Maximum Transport Speed	20 MPH
Lift Cylinder	3 1/2-inches x 8-inches ASAE
Tilt Cylinder	3 1/2-inches x 8-inches ASAE