Browse Inventory »

Online Parts »

Bush Hog 2D96

Shop by Brand / Bush Hog / Tillage / Harrows / 2D Series Lift Disc Harrows / 2D96

Double tap to zoom

Features
Specifications

Features

Performance Features

Adjustable gang angles, front and rear, using an easy-to-grasp handle
Cat 1 standard and quick hitch on the 1D and 2D series, along with Cat 1 and 2 standard and quick hitch on the 3D series
Variable Blade Spacings Available: 9” front and rear gangs for tough-to-cut “New Ground” • 7 1/2 in. front and rear gangs for finer soil finishing • 9 in. front gangs / 7 1/2 in. rear gangs–the best of both worlds

Construction Features

Square and rectangle tube steel frames and gang tubes
Self-aligning, sealed ball bearings
Notched disc blades for maximum cutting action
1 in. square, high carbon steel gang axle on the 1D and 2D series, with a 1 1/8 in. square, high carbon steel gang axle used on the 3D series
Available in tractor colors
Optional disc scrapers

Product Features

Bearing hangers reinforces with gussets
Easy-to-grasp handle for simple gang adjustment

Specifications

Model	2D96
DRAWBAR HP REQUIREMENT	65 HP
HITCH TYPE	Cat. 1 Std and QH
MAX. CULTIVATION WIDTH	96 in.
APPROX. WT. LOAD ON EACH BLADE	39-41 lbs.
DISC BLADE SIZES NOTCHED	18 in. or 20 in.
DISC BLADE SPACING	9 in. Front, 7 1/2 in. Rear or 9 in. Front/Rear or 7 1/2 in. Front/Rear
DISC BEARING TYPE	Self-aligning, sealed ball bearings
NO. OF BEARINGS	2 per gang
FORWARD GANG ANGLE ADJUSTMENT	Front Gangs – 0°, 7°, 14°, 21°
REAR GANG ANGLE ADJUSTMENT	Rear Gangs – 7°, 14°, 21°
MAINFRAME FRONT TUBE CONSTRUCTION	2 in. square tubing
GANG ARM CONSTRUCTION	3 in. x 1 1/2 in. tubing
GANG AXLES	1 in. square, high carbon steel
DISC SCRAPPERS	Optional