SERVING THE AREA SINCE 1970
Danuser Auger Bucket
Material Handling Buckets Auger Bucket
Overview:
Auger Buckets
Transport, mix, and dispense concrete (up to 1” slump), sand, wildlife feed, and agricultural grains
- Transports and dispenses a wide variety of materials
- Conveniently dispense left or right with skid-steer mount on both sides
- 1/2 yard capacity (13.5 cubic feet) standard
Features
Transport, mix, and dispense concrete (up to 1” slump), wildlife feed, and agricultural grains.
The Auger Bucket has a ½ yard capacity (13.5 cubic feet) an optional hopper extension can be added to increase the capacity to ¾ yard (20.25 cubic feet). Rubber-flighted design acts as a seal to limit materials leaking out of the bucket. Skid-steer quick attach mount on both sides for left or right discharge. All buckets come standard with one 2’ and one 3’ chute and a 7’ hose kit with flat faced couplers and motor fittings.
Versatile
1/2 yard Capacity
The Auger Bucket has a ½ yard capacity (13.5 cubic feet) an optional hopper extension can be added to increase the capacity to ¾ yard (20.25 cubic feet).
Reach
Reach difficult areas for footings, slabs, sidewalks, fence posts, sign posts, deck posts, piers, etc.
Rubber-Flighted
Rubber-flighted design acts as a seal to limit materials leaking out of the bucket.
Skid-Steer
Quick attach mount on both sides for left or right discharge.
Standards
All buckets come standard with one 2’ and one 3’ chute and a 7’ hose kit with flat faced couplers and motor fittings.
Specifications
Part ID: 11002 - Auger Bucket Model 3110 -Discharge Auger with Heavy Service Motor -- Rubber-Flighted (4 Bolts)
Capacity
1/2 yd (13.5 cubic ft); up to 3/4 yard (20.25 cubic ft) with optional hopper extension.
Hydraulic Requirements
12 GPM
2,000 PSI
Mounting Options
Skid-Steer
Overall Height (A) (inches)
27"
Overall Width (B) (inches)
21-1/2"
Overall Length (C) (inches)
74-1/2"
Overall Bucket Length (D) (inches)
68-1/2"
Weight
380 lb.
Auger Length (inches)
61-1/2"
Auger Diameter without Rubber (inches)
4"
Auger Diameter with Rubber (inches)
6-1/2"
Auger Flighting Spacing (inches)
4"
NOTE: Rubber-flighted auger models for wet materials. PN 11063 steel auger models must be used for dry materials, sand and asphalt.
Part ID: 11003 - Auger Bucket Model 3220 - Mixing Auger with Heavy Service Motor -- Rubber Flighted (7 bolts)
Capacity
1/2 yd (13.5 cubic ft.); up to 3/4 yard (20.25 cubic ft.) with optional hopper extension.
Hydraulic Requirements
12 GPM
2,000 PSI
Mounting Options
Skid-Steer
Overall Height (A) (inches)
27"
Overall Width (B) (inches)
21-1/2"
Overall Length (C) (inches)
74-1/2"
Overall Bucket Length (D) (inches)
68-1/2"
Weight
380 lb.
Auger Length (inches)
61-1/2"
Auger Diameter without Rubber (inches)
4"
Auger Diameter with Rubber (inches)
6-1/2"
Auger Flighting Spacing (inches)
4"
NOTE: Rubber-flighted auger models for wet materials. PN 11063 steel auger models must be used for dry materials, sand and asphalt.
Part ID: 11004 - Auger Bucket Model 3131 - Sandbagging Auger Steel Auger w/Scraper Blade Installed
Capacity
1/2 yd (13.5 cubic ft.); up to 3/4 yard (20.25 cubic ft.) with optional hopper extension.
Hydraulic Requirements
12 GPM
2,000 PSI
Mounting Options
Skid-Steer
Overall Height (A) (inches)
27"
Overall Width (B) (inches)
21-1/2"
Overall Length (C) (inches)
74-1/2"
Overall Bucket Length (D) (inches)
68-1/2"
Weight
380 lb.
Auger Length (inches)
61-1/2"
Auger Diameter without Rubber (inches)
4"
Auger Diameter with Rubber (inches)
6-1/2"
Auger Flighting Spacing (inches)
4"
NOTE: Rubber-flighted auger models for wet materials. PN 11063 steel auger models must be used for dry materials, sand and asphalt.
Part ID: 11005 - Auger Bucket Model 3230 - Asphalt Auger Steel Auger
Capacity
1/2 yd (13.5 cubic ft.); up to 3/4 yard (20.25 cubic ft.) with optional hopper extension.
Hydraulic Requirements
12 GPM
2,000 PSI
Mounting Options
Skid-Steer
Overall Height (A) (inches)
27"
Overall Width (B) (inches)
21-1/2"
Overall Length (C) (inches)
74-1/2"
Overall Bucket Length (D) (inches)
68-1/2"
Weight
380 lb.
Auger Length (inches)
61-1/2"
Auger Diameter without Rubber (inches)
4"
Auger Diameter with Rubber (inches)
6-1/2"
Auger Flighting Spacing (inches)
4"
NOTE: Rubber-flighted auger models for wet materials. PN 11063 steel auger models must be used for dry materials, sand and asphalt.
