Serving the area since 1970
Exmark LZE740EKC60400
Lazer Z E-Series EFI LZE740EKC60400
Overview:
The Lazer Z EFI E-Series is the perfect choice for professional landscape contractors who want the innovative engineering and commercial-grade quality of a Lazer Z, but in a value package. Features the same welded, heavy-duty, 1.5”x 3” tubular steel unibody frame found throughout our Lazer Z models. These mowers come w... + Read More
Features
This mower strikes a perfect balance of value and performance featuring a Deck Support System, Simplified Hydro-drive, Unibody Frame and available with a Rear Discharge Deck.
Specifications
| Equipment | |
| Blade Spindles | No maintenance, sealed and non-greasable spindles; 7.75"-diameter cutter housing with 25mm (.98") diameter spindle shaft and splined blade driver. |
| Drive Tires | 24 x 12-12, 4 ply Super Turf® |
| Cup Holder | Standard |
| Tractor Frame | Unibody, welded, heavy-duty 1.5" x 3" tubular steel. |
| Steering Control | Hydraulically dampened twin levers, adjust fore and aft. Adjustable dampeners (3 positions) to customize drive responsiveness. Also adjustable to 2 height positions. |
| Front Caster Tires | 13 x 5.0-6, smooth-tread, semi-pneumatic. |
| Parking Brake | Lever-actuated disc brake. |
| Seat | Two tone bolstered seat with Elastomeric Vibration Control material. Adjustment: Fore and aft from Operators' Position. |
| Electrical | 12-volt battery with 20-amp alternator. |
| Power Components | |
| Engine Brand | Kohler® |
| Engine Model | ECV740 |
| Engine Displacement | 747 |
| Engine Series | Command™ EFI |
| Engine Type | Electronic Fuel Injected |
| Engine Speed | 3,750 rpm |
| Air Filter | Heavy-duty canister air filtration system |
| Fuel Type | Gas EFI |
| Fuel Capacity | 8-gallon (30.3-L) single fuel tank with single fill location. |
| Fuel Indicator | Yes - electronic Sender |
| Drive | Hydro-Drive |
| Drive Description | Two Exmark exclusive Parker unitized pump and wheel motor systems with no hoses, integrated cooling fans, shock valve, 1.7-quart integrated reservoir, spin-on filter and heavy-duty components. 12 cc pumps and 14. 5 cubic inch motors. |
| Speed | Infinitely variable speed selection from 0-10.0 mph (16 kmph) forward, 0-6.0 mph (9.7 kmph) reverse. |
| Carb Compliant | No |
| Deck Lift | Standard; foot-controlled deck lift changes cutting height and lifts the deck to maneuver around obstacles, or place in transport position. |
| Safety Package | Operator Presence Controls (OPC) and drive system interlock, with safety interlock system indicators. |
| ROPS | 2-post foldable ROPS standard with seat belt and latch. |
| PTO Engagement | MagStop electromagnetic 200-ft-lb clutch with spot brake |
| Drive Wheel Release | Allows unit movement without engine running. |
| Casters | .50" thick caster yoke arms. |
| Decks | |
| Width / Cutting Deck | 60" |
| Deck Style | Floating Deck |
| Deck Style Description | Full-floating UltraCut Series 4. Side discharge standard, with molded discharge chute and option to bag or mulch. |
| Deck Construction | 10-gauge top that is formed and continuously seam welded, 7-gauge side skirt and 7-gauge formed and welded spindle mounting locations for improved strength and reduced weight. |
| Blade Tip Speed | Approximately 18,500 fpm. |
| Cutting Heights | 1.0" (2.5 cm) to 5.5" (14.0 cm) in 0.25" (0.64 cm) increments adjustable from operator's seat. |
| Blades | 3 Blades at 20.50" Length |
| Dimensions | |
| Width | 72.8 in. (184.9 cm) |
| Length | 83.1 in. (211.1 cm) |
| Height | 70 in. (177.8 cm) |
| Curb Weight | 1115 |
