Serving the area since 1970
Exmark RAS730GKA60RA3
Radius S-Series Rear Discharge RAS730GKA60RA3
Features
Radius Rear Discharge Deck
Available in 60-inch cutting width, the rear-discharge deck offers increased clipping discharge control, reduced noise, and the ability to trim on both sides of the cutting deck—all while keeping the operator clean.
Heavy Duty Unibody Frame
Fully-welded using 2-inch by 3-inch frame tubes, the Radius frame design places major components including the engine, hydro drive and fuel tank lower, with better mass centralization. This gives the Radius increased hillside traction and stability, with heightened maneuverability.
Quick Adjustable Rollover Protection System (ROPS)
Uses an easy-to-fold up-and-down design built from round tubes and provides flexibility for placement of accessories.
Fuel Gauge Window
Easy-to-use, accurate sight window-type fuel gauge is standard on all Radius models.
Height of Cut Made Easy
The patented height of cut system is a user friendly tool developed for operators to quickly and accurately select the height of cut.
Specifications
NOTES:Â N/A in California
| EQUIPMENT | Â |
| Blade Spindles | No maintenance, sealed and non-greasable spindles; 7.75"-diameter cutter housing with 25mm(.98")diameter spindle shaft and splined blade driver. |
| Drive Tires | 23 x 10.5-12 Super Turf (142-4266) |
| Tractor Frame | Unibody, welded, heavy-duty 2" X 3" rectangular tubular steel. |
| Steering Control | Hydraulically dampened twin levers adjustable both fore and aft. Also has 2-position height adjustment. |
| Front Caster Tires | 13 x 6.5-6, smooth tread, pneumatic. Caged Roller Bearings (126-3289) |
| Parking Brake | Lever-actuated pawl brake. |
| Seat | Deluxe suspension (adjustable spring suspension) seat with high back, molded foam flip-up armrests, and integral safety switch |
| Electrical | 12-volt battery with 15-amp alternator. |
| Standard Features | Engine hour meter, cup holder, tow hitch and jack receiver |
| UPC | 193308215778 |
| POWER COMPONENTS | Â |
| Engine Brand | Kawasaki |
| Engine Model | FX730V |
| Engine Displacement | 726 |
| Engine Series | V-Twin |
| Fuel System | Carbureted |
| Engine Speed | 3700 rpm |
| Air Filter | Cyclonic Air Cleaner |
| Fuel Type | Gas Carbureted |
| Fuel Capacity | 7-gallon (26.5-L) single fuel tank with single fill location. |
| Fuel Indicator | Translucent Visual |
| Drive | Hydro-Drive |
| Drive Description | Dual Hydro Gear ZT3400, hydrostatic transmission with charge pumps, relief valves and independent, replaceable filters. |
| Speed | Infinitely variable speed selection from 0-9.0 mph (14.5 kmph) forward, 0-5.0 mph (8.0 kmph) reverse. |
| Carb Compliant | No |
| Deck Lift | Standard; foot-controlled deck lift changes cutting height and lifts the deck to maneuver around obstacles, or place in transport position. |
| Safety Package | Operator Presence Controls (OPC) and drive system interlock, with safety interlock system indicators. |
| ROPS | 2-post foldable ROPS standard with seat belt and latch. |
| PTO Engagement | MagStop electromagnetic 125-ft-lb clutch |
| Drive Wheel Release | Allows unit movement without engine running. |
| Casters | .375" thick caster yoke arms |
| Engine Spec | _S26 |
| DECKS | Â |
| Width / Cutting Deck | 60" |
| Deck Style | Floating Deck |
| Deck Style Description | Full-floating UltraCut Rear Discharge Deck. |
| Deck Construction | 10-gauge high strength alloy top that is formed and continuously seam welded, with 7-gauge side skirt. |
| Blade Tip Speed | Approximately 18,500 fpm. |
| Cutting Heights | 1.5" (3.8 cm) to 5.0" (12.7 cm) in 0.25" (.6 cm) increments, adjustable from operator's seat. |
| Blades | 3 Blades at 20.50" Length |
| DIMENSIONS | Â |
| Width | 66 in (168 cm) |
| Length | 84 in (213 cm) |
| Height | 70 in (178 cm) |
| Curb Weight | 1044 |
