H&S S3127 270-Bushel

Double tap to zoom

 

Features

  • The heavy-duty series of H&S manure spreaders feature a massive unitized welded frame with heavy floor supports, side stakes, and wrap-around steel front corners.
  • Strong rear main beater side panels are slanted for clearance and wider spread and then welded to the strong 5″ U-channel side members. Compares with any on the market.
  • The side flares on all H&S heavy-duty manure spreaders are made of 10-gauge g210 culvert grade galvanized steel.
  • Sides, front panel, and both sides of the rear hydraulic endgate use fiberglass reinforced plywood to provide for easy cleaning and minimal freeze-up.
  • The plastic-coated plywood floor allows for considerably less torque to move a heavy load.
  • The drive utilizes the patented H&S two-speed gearbox. Shifting is all done in the enclosed two speed/beater shutoff gearbox.
  • The 29″ diameter beater has two styles of replaceable beater paddles. Half of the 14 beater paddles are blunt for widespread, and the other half are a sharp ripper-type for cutting and shredding. Beater-side wiper blades are also standard equipment.
  • The hydraulic endgate features a single cylinder with the hydraulic lines running through a 3″ x 3″ tube under the floor for protection. The upright position of the hydraulic cylinder stroke allows the gate to lift with the least strain at pivot points.
  • Special cast steel alloy apron idler slides are used instead of idler sprockets, making for years of dependable service.
  • Adjustment for the main apron is easily made by simply loosening the two side bolts and drawing up the long bolt.
  • PTO Apron Low Speed/540 RPMs: 4′ 9″ per minute.
  • PTO Apron High Speed/540 RPMs: 8′ 9″ per minute
  • A front splash guard is standard equipment.
  • Greaseable bearings

Specifications

MODEL 3127
CAPACITY - OLD RATING 270 bu
CAPACITY CU. FT. STRUCK LEVEL 167
DIMENSIONS  
TOP OF FLARE WIDTH 68″ (173 CM)
INSIDE WIDTH 60″ (152 CM)
INSIDE LENGTH 14′ 1″ (4.3 M)
INSIDE DEPTH 28 ⅜″ (72 CM)
OVERALL WIDTH W/STANDARD TIRES 94 ½″ (240 CM)
OVERALL LENGTH 20′ 5.5″ (6.3 M)
OVERALL LOADING HEIGHT-TOP OF FLARE 51.5″ (131 CM)
OVERALL HEIGHT W/HYD. ENDGATE 55″ (140 CM)
CONSTRUCTION  
DIAMETER OF BEATER 29″ (74 CM)
MAIN APRON CHAIN T-ROD
UPPER BEATER OPTIONAL
SPINDLE SIZE 2 ½″ (6 CM)
STANDARD TIRE SIZE 295x22.5 RECAP
WEIGHT W/TIRES 3,230 lbs (1,495 KG)
STANDARD  
REAR HYDRAULIC ENDGATE STANDARD
JACK STANDARD
DRIVE 2 SPEED
Front Splash Panel Standard
HYD. CYL ON HYD. ENDGATE 1-STANDARD 2ND OPTIONAL 
PTO Speed 540