H&S PS6180

Shop by Brand / H&S / Manure Spreaders / Power Spread / PS6180

Double tap to zoom

3/4″ thick vertical beaters vs. 1/2″ on some competitors.
Vertical beaters feature “REVERSE FLIGHTING” on the top 20+″ of the beater flighting. This patented feature allows for an even spread pattern of material.
Rubber tongue suspension is standard equipment – not an option like some of the competition!
Single bolt easy adjust main apron chain.
Heavy 2″ x 4″ x 1/4″ tubular apron slats.
3/4″ marine grade 80 log chain vs. competitors w/5/8″.
Heavy duty rectangular tubing is used for the pole to ensure strength and long life.
The bottom drive Monoblock Gearbox w/3-1/8″ output shafts vs. 2-1/ 2 on the competition.
A constant velocity tractor PTO, and overrunning clutch on the gearbox PTO provides protection to the driveline.
The hydraulically driven apron features “Heavy Duty Dual Drive Apron Gearboxes.”
Beater blades are replaceable, and the beater assembly is removable for stockpiling manure.
Removal of the beater assembly is done by simply removing the mounting bolts and disconnecting the PTO gearbox driveshaft.
LED lighting is a standard feature.

Model	PS6180
CAPACITY - HEAPED BUSHEL PER S324.2	638 Cu. Ft.
CAPACITY - HEAPED BUSHEL PER S324.1	764 Cu. Ft.
CAPACITY CUBIC FT. STRUCK LEVEL	578 Cu. Ft.
SIDE LOADING HEIGHT	94.75″ / 8′ 10.75″
VERTICAL BEATER HEIGHT	132″ / 11′
HEIGHT-TOP OF HYD. END GATE	127″ / 10′ 7″
HEIGHT-TOP OF SCREEN	132″ / 11′
INSIDE WIDTH	78.75″ / 6′ 6.75″
INSIDE LENGTH	235.50″ / 19′ 7.50″
INSIDE DEPTH	52.50″ / 4′ 4.50″
OVERALL WIDTH W/TIRES	169″ / 14′ 1″
OVERALL LENGTH	393″ / 27′ 5″
STANDARD NUMBER OF BEATERS	2
VERTICAL BEATER DIAMETER	39″
REPLACEABLE BEATER PADDLES	Yes
SPREAD PATTERN - APPROXIMATE	25' - 30' dependent
on the weight of material
UNLOAD TIME - APPROXIMATE	2-1/2 minutes dependent on tractor hydraulic flow & pressure
REMOVEABLE BEATER ASSEMBLY	Yes
APRON CHAIN SIZE	3/4″ Grade 80
HITCH EMPTY WEIGHT - APPROXIMATE	570 LBS.
HUB	10 Bolt - 25,000 Rating
SPINDLE SIZE	4.5″
TIRE SIZE - STANDARD	700/50 x 26.5
HYDRAULIC REQUIEMENTS	3,000 p.s.i. & 30 g.p.m.
HYDRAULIC END GATE	Guillotine/Metering Style
CYLINDERS ON END GATE	2
JACK	Choice of Crank or Hydraulic
HITCH CHOICES	Swivel Clevis / Class 4 or 5 Bullnose
POLY BUMP RAILS	Standard
PTO CHOICES	Choice of 1-3/8″ or 1-3/4″ 1,000 RPM Constant Velocity
WEIGHT W/TIRES	Approximately 21,000#