H&S HC5114 14-Wheel

Double tap to zoom



  • The HC5114 HI-CAPACITY 14-wheel rake has the raking wheels positioned ahead of the rake arms, main frame beams, and transport wheels.
  • With a high and wide rear frame, there are no hang-up points or restrictions when raking the heaviest of hay crops.
  • A brake band on each front gauge wheels can be easily adjusted to field conditions.
  • The large, independent 7.5 mm 60″ rake wheels deliver more capacity and turn slower for less tooth wear.
  • Beehive-style spring suspension system allows the rake wheels to follow the contours of the ground smoothly.
  • A large diameter rake wheel hub adds strength to the rake wheel dish.
  • The adjustment for the ground pressure on the rake wheels allows the operator to fine-tune to fit varying conditions.
  • The rake arms feature two ball bearings on each end of the arm for long life, smooth operation, and less wear than rakes with bushings.
  • The windrow width adjustment is done with a hand crank and adjusts windrows from 38″ to 58″ width.
  • Independent articulated rake beams have the flexibility to flex 3′ up or 3′ down.
  • Limited oscillating offset tandem transport wheels ensure a smooth, level ride, even over irrigation tracks.
  • Raking widths can be hydraulically adjusted in any position to a pre-determined raking width up to 28′.
  • Rake wheel wind boards are standard.



  • 2-Wheel Add-On Kit (for converting to a 16-Wheel Rake)
  • 2-Wheel Center Kicker Assembly w/Hydraulic Lift
  • Highway Lighting Kit
  • 10,100# Safety Chain


Rake Wheels  
Wheel Diameter 60″
Teeth Per Wheel 40
Tooth Diameter 7.5mm
Transport Width 8' 10"
Transport Length 27′ 3″
Raking Width Up to 28′ Hyd. Set.
Wing Flex 3′ Up or Down
Windrow Width Adjustment 46"-66"
Rake Wheel Hubs Ball Bearings
Number of Transport Wheels 8
Jack Standard
Gauge Wheels 15″
Transport Wheels 15″