Lane Shark LANESHARK LS-3

Shop by Brand / Lane Shark / Brush Cutter / THE LANE SHARK / LANESHARK LS-3

Double tap to zoom

LANE SHARK LS-3 COMPATIBILITY:

Hydraulic implement flow rate 5gpm to 8.5gpm - Standard motor
Hydraulic implement flow rate 8.6gpm to 15gpm - High capacity motor (Special Order Only)
Third function or Lane Shark valve kit. ONLY pressure comes from the remote, and return must be to the sump. (CANNOT RETURN THROUGH AUXILIARY HYDRAULICS).
We do not recommend rear remote plumbing as some tractors may lose loader priority
NOT COMPATIBLE WITH DIVERTER VALVES
Minimum dry tractor weight 2000lbs
Minimum tractor width 55 inches
Certified roll over protection system
For stabilization while operating the Lane Shark, fill rear tires of your tractor with water for use as a ballast, as well as additional weight on rear. ie: box blade, or rotary cutter.

LANE SHARK LS-3 DETAILS:

The Lane Shark LS-3 is a light duty rotary cutter designed to clear overgrown roadways, for light land management, and property maintenance.
Easily cuts up to 2-3” diameter limbs, brush, saplings, and underbrush. The Lane Shark has 11 positions that allow it to cut vertically, offset, directly in front (level), or 25°, 35°, & 45° in the vertical and offset positions.
The Lane Shark LS-3 attaches to the front of any FEL tractor with a SSQA or JD Hook & Pin-Style attachment system. There are adapters available to fit most other applications sold separately.
The Lane Shark LS-3 weighs just under 320 lbs.
When purchasing the Lane Shark LS-3 brush cutter, you will receive a unit equipped with #10 ORB (O-ring Boss) inlets. When using ORB, a minimum hose inside diameter of 3/8” is required.
NOT COMPATIBLE WITH SKID STEERS

MODEL	LS-3
HYDRAULIC FLOW RATE: SMALL MOTOR	5-8.5 GPM
HYDRAULIC FLOW RATE: STANDARD MOTOR	8.5-15 GPM
HYDRAULIC FLOW RATE: LARGE MOTOR	N/A
WEIGHT	320LBS
DIMENSIONS	34"Lx34"Wx29"H
CUTTING DIAMETER	32"
CUTTING CAPACITY	2-3"
CUTTING POSITIONS	11
DECK CONSTRUCTION	1/8" Plate Reinforced with 1/4"
BLADES	2, Double Sided
LOADER COMPATIBILITY	SSQA, JD Hook & Pin, Global/Euro (Adapter Required)
MINIMUM REQUIRED TRACTOR WEIGHT	2,000lbs
MINIMUM REQUIRED TRACTOR WIDTH	55"