Loftness 71BS

Double tap to zoom

 

Features

  • Depth Gauges
    The Battle Ax rotor design uses built-in depth gauges to control cutting depth, like raker teeth on a chainsaw.
  • Two-Stage Cutting Chamber
    Two shear bars allow the Battle Ax to produce a finer mulch with fewer passes. The primary shear bar is adjustable for controlling particle sizes.
  • Convenient Tooth Mounting
    The cutting teeth are mounted to the rotor with a single bolt. They can be easily reversed, replaced or removed on the jobsite using a common hex socket.
  • High-Performance Teeth Options
    Choose from three teeth options:
    Quadco planer blades
    Hard-surface Quadco blades
    Standard carbide teeth
  • Fixed-Displacement Gear Motor
    The high-pressure gear motor option is a reliable, cost-effective workhorse. It operates at a constant RPM that provides an optimal balance between speed and torque. This system was designed for skid steers delivering 29-40 GPM at up to 4,300 PSI. (Rated up to 85 hydraulic horsepower.)
  • V-Drive Variable-Displacement Piston Motor
    The V-Drive option uses a variable-displacement piston motor, which automatically shifts the rotor RPM from the highest speed to a lower range for increased torque, as needed. The result is less stalling and a shorter recovery time, helping operators to concentrate on the job instead of power settings and continuous head repositioning. This motor provides a more effective use of power as the head RPM increases under lighter loads, allowing operators to quickly slice through smaller or more flexible growth, as well as when back-dragging material on the ground. As larger trees, trunks and stumps are engaged, the motor increases the drive displacement to increase torque. It is designed for skid steers delivering 32-62.9 GPM at up to 6,000 PSI. (Rated up to 150 hydraulic horsepower.)
  • Synchronous Belt Drive
    The positive drive, cog belt and sprocket design maximizes efficiency and requires less maintenance than other drive types.
  • Machined Anti-Wrap Bearing Protector
    Rotor ends are machine turned to mate with close tolerance, machined anti-wrap rings, which minimize debris in the bearing chamber.
  • Adjustable Push Bar
    Constructed with integrated, welded claw hooks, the bar helps push falling trees and brush away from the power unit, while also allowing them to be properly positioned for efficient feeding into the head.
  • Performance Monitoring
    An integrated PSI gauge that monitors the hydraulic load is positioned for easy viewing from the skid steer cab. It helps keep the Battle Ax at the optimum hydraulic load for peak performance throughout an application.
  • Custom Hydraulic Control Valve
    A high-pressure relief valve protects the Battle Ax from pressure spikes at the source. It also includes an anti-cavitation shutdown circuit.
  • Premium Strength Steel Housing
    The S Series Battle Ax is designed for today’s heavier, more powerful skid steers and compact track loaders. All body components are laser cut from premium strength steel. Also, abrasion resistant steel is used in high-wear areas.
  • Replaceable Skid Shoes
  • Steel Deflector Chains
    Running the entire length of the mulching attachment, steel deflector chains improve safety by reducing flying debris.
  • Maximum Visibility
    The Battle Ax is designed for maximum visibility from the skid steer cab, which increases safety, productivity and efficiency.
  • Universal Skid Steer Mount
    The universal mount allows the Battle Ax to be easily used with any brand or model of skid steer or compact track loader.
  • Hydraulic Hose Routing
    Hoses are right sized and routed to reduce the chance of binding, yet are long enough for a full range of motion without damage. Hoses are included, couplers are not.
    A right-hand hose kit is optional for use on skid steers with hydraulic couplers on the right-hand side of the machine.
  • 17-Inch-Diameter Rotor
  • 2-3/16″ Piloted Double Taper Roller Bearings
  • Optional Bolt-In Liner
    A bolt-in liner can be added for use in abrasive environments.
  • 2-Year Warranty
    The Battle Ax comes standard with an industry-leading 2-year warranty.

Specifications

Model 71BS
Cutting Width 71" (1.8 m)
Overall Width 89.1" (2.26 m)
Number of Teeth 36
Weight (with liner/without mount) 2,841 LBS (1,288.7 kg)
Crated Weight 3,088 LBS (1400.7 kg)
Hydraulic Horsepower Range 50-150 Hydraulic HP
Fixed Displacement Gear Motor Up to 4,300 PSI - 28-40 GPM
Variable-Displacement Piston Motor Up to 6,000 PSI - 32-62.9 GPM