New Holland W80C High Speed

Double tap to zoom



New Holland C Series compact wheel loaders are the right tool for the tough jobs you do every day. Even though compact is in the name, the W80C High Speed (HS) loader delivers big power, high performance, and outstanding stability. Dependable engine and hydraulic power and an array of attachments give you all the tools to efficiently scrape, grade, and haul to the finish line. These machines are ready to work when you are.


New Holland's Z-Bar linkage is a rugged, simple design ideal for high-production load-and-carry applications, like moving and setting drainage pipe or stacking landscape timbers. Model W80C HS provides a maximum of 13,927 lbf (6317 kgF) in breakout force and yields 3 in (73 mm) of digging depth. Plus, lofty lifting capacities of 8,424 lb (3821 kg) at full height, 10,644 lbs (4828 kg) at maximum reach, and 13,746 lbs (6235 kg) on ground.


Exceptional maneuverability and a tighter turning radius are essential on equipment operating on small jobsites and in constricted spaces. With this in mind, the W50C TC was designed to compactly conquer due to its reduced machine length of 222 in (5684 mm), machine width of 73 in (1860 mm) and operating height measuring up to 169 in (4322 mm).

A lower center of gravity and the 88 in (2225 mm) wheelbase increase stability on New Holland compact wheel loaders so you can lift and move larger loads, travel smoothly and quickly, and operate with more confidence.


With 74 gross HP (55 kW) and 233 ft-lb (245 N⋅m) of peak torque @1400 rpm on hand, New Holland compact wheel loader W80C HS helps you work faster and more productively. Plus, New Holland compact wheel loaders offer a maintenance-free Tier 4 final solution.

No maintenance means no regeneration, no expensive replacement filters, no extreme exhaust temperatures and no after-treatment fluids. That being said, these engines provide power needed to tackle challenging jobs and technology to maximize fuel efficiency and reduce emissions.

When servicing is required, A tilt-up hood, ground-level access to maintenance points and long service intervals reduce the time your operators spend on routine maintenance tasks. Radiator, filters, hydraulics, oil cooler, engine — they’re all easily accessible.


Whether you choose a compact wheel loader with a comfortable cab or an economical ROPS platform, you’ll enjoy electro-hydraulic controls that increase bucket and boom control and provide easy vehicle-inching capability. The inch and brake pedal allows constant engine rpm power to be diverted to the loader’s hydraulics without disconnecting the drive. The hydrostatic transmission provides precise speed control with minimum shifting, so operators can focus on the task at hand.

Electro-hydraulic controls provide more loader control, letting you:

  • Increase control of the bucket and boom, whether separately or in combined movement.
  • Take more control over bucket-shake performance.
  • Adjust and fine-tune operation to the way you work and increase operator comfort in all jobs.
  • Improve control of the machine during inching, making it easier to get into optimum position on the jobsite.
  • Take advantage of electro-hydraulic lift/tilt for even more operation proficiency.
  • Optimize vehicle-direction inversion (smoothness vs. quickness).



C Series compact wheel loaders are compatible with a full line of buckets, attachments and accessories available from New Holland and numerous third-party manufacturers. Whether you need a broom for landscaping, a dozer blade to move snow, or a bucket for concrete work, your New Holland dealer can help you source the right tool.

Waste no time and avoid the elements by quickly switching attachments from the comfort of the cab, thanks to an integrated hydraulic quick-coupler.


All New Holland compact wheel loaders are designed to deliver greater stability, letting you lift and move bigger loads, operate with more confidence, and travel more smoothly even in tough conditions.

When moving material from stockpiles to trucks or around the jobsite, the Auto Ride control option provides a more comfortable ride on rough ground with less load spilling and wear and tear. It engages automatically when ground speed reaches 2.5 mph and automatically disengages at slower speeds for loading and unloading.

Ideal for tasks such as plowing snow and cold planing, the high-flow option with creep speed provides maximum hydraulic flow at a constant speed up to 3.4 mph (5.5 km/h). For greater control and performance, optional creep speed allows the operator to set the engine’s RPM independent of ground speed.

Complete the package with a front electrical socket and case drain. The return-to-dig option quickly returns the bucket to the dig position after dumping, so you’re always ready for the next operation.


The cab on a C Series compact wheel loader packs more comfort and ease of operation into every inch. The design incorporates spacious dimensions with natural, ergonomic controls to keep you working comfortably and productively all day long. Wide steps provide easy entry and exit. The seat, steering column and armrest are adjustable, and the standard LCD display puts information just where you want it. A high-performance heater/defroster is standard. Add optional air-conditioning for operator comfort on the hottest working days.


Model W80C High Speed
Cab height (in. (mm)) 106" (2680)
Wheelbase (in. (mm)) 88" (2225)
Ground clearance under shaft (in. (mm)) 19" (493)
Ground clearance under axles (in. (mm)) 15" (370)
Angle of departure (degrees) 32°
Overall width without bucket (in. (mm)) 73" (1860)
Tread width (in. (mm)) 59" (1500)
Operating height - fully raised with spillguard (in. (mm)) 169" (4322)
Hinge Pin Height (ft. in. (mm)) 132" (3395)
Overall length - bucket level on ground (in. (mm)) 222" (5684)
Dump height - fully raised, 45° dump (in. (mm)) 105" (2687)
Bucket reach - 7 ft 0 (2.13m), 45° dump (in. (mm)) 52" (1323)
Bucket reach - fully raised, 45° dump (in. (mm)) 33" (845)
Dig depth (in. (mm)) 3" (84)
Turning radius: outside (in. (mm)) 157" (3987)
Turning angle: Total angle (degrees) 80
Turning angle: From center (degrees) 40
Turning angle: Rear axle oscillation, total (degrees) 20
Voltage (V) 12
Alternator (amps) 120
Batteries 95 AHR, 900 CCA
Pump (steering / implement) Open-centered pressure/flow compensated. Fixed gear pump
Loader control valve Open-center, Hydraulic Loader Control with single lever includes: Forward/Neutral/Reverse switch, Floating switch, Low/High Travel mode switch, Auxiliary Function Roller
Loader auxiliary steering Hydraulic orbital center-pivot articulating with on-demand oil flow
Filtration 15-micron, full flow replaceable cartridges on return line
Flow at 2500 rpm (gpm (Lpm)) 22 (85)
Main relief pressure (psi (bar)) 3335 (230)
High Flow  
Pump Additional HF pump
Flow at 2500 rpm (gpm (Lpm)) 34 (130)
Pressure (psi (bar)) 2900 (200)
Lift cylinder(s) 2
Bore diameter (in. (mm)) 3 (84)
Rod diameter (in. (mm)) 2 (51)
Stroke (in. (mm)) 30 (751)
Dump cylinder: Bore diameter (in. (mm)) 3 (89)
Dump cylinder: Rod diameter (in. (mm)) 2 (57)
Dump cylinder: Stroke (in. (mm)) 20 (507)
Model F5HFL463A*F004
Type 4-stroke
Cylinders 4 cylinders
Fuel injection High pressure common rail injection
Fuel Diesel
Fuel Filter Replaceable, full flow
Air filter Dry type element w/ warning restriction indicator
Radiator Core type Staggered
Fan Direct drive
Lubrication/cooling oil pump Integral
Engine oil SAE 10W40 CJ-4 Diesel SAE 0W40 CJ-4 Diesel
Pump Deep sump plate cooler with pressurized under-piston nozzles
Bore (in. (mm)) 3.898 (99)
Stroke (in. (mm)) 4.33 (110)
Displacement (gal. (L)) 0.9 (3.4)
Pump operating angles: Side-to-side (degrees) Rated 35
Pump operating angles: Fore and aft (degrees) Rated 35
Pump operating angles: Oil filtration Replaceable, full flow
Engine speed: Rated speed, full load (rpm) 2500
Engine speed: Low idle (rpm) 950
Engine speed: High idle, no load (rpm) 2500
Horsepower @ 2500 rpm (Gross hp (kW)) 74 (55)
Horsepower @ 2500 rpm (Net hp (kW)) 70 (52)
Peak torque @ 1400 rpm (Gross lb. ft. (Nm)) 233 (316)
Peak torque @ 1400 rpm (Net lb. ft. (Nm)) 227 (308)
Transmission Hydrostatic transmission
Planetaries Outboard
Pump relief (psi (kPa)) 6 (42)
Pump flow @ 2500 rpm (gpm (Lpm)) 37 (140)
Differential Open Diff or LSD or 100% Diff Lock
Front Axle  
Differential ratio 3.67
Planetary ratio 6
Final axle ratio 22
Gear Box  
1st ratio 2.75
2nd ratio 1.163
Service brakes Single pedal. Not assisted, Hydraulic Brake pump with control of the "Inching" function. Auto refill system with auxiliary fluid tank. Caliper on front axle
Parking brake Mechanical control lever, Single dry disk on input of the front axle, Mechanical Caliper with no auto wear adjustment
Travel Speeds  
Turtle - Forward (mph (kph)) 3 (5)
Turtle - Reverse (mph (kph)) 3 (5)
Rabbit - Forward (mph (kph)) 9 (14)
Rabbit - Reverse (mph (kph)) 9 (14)
High speed - Turtle - Forward (mph (kph)) 3 (5)
High speed - Turtle - Reverse (mph (kph)) 3 (5)
High speed - Rabbit - Forward (mph (kph)) 21 (33)
High speed - Rabbit - Reverse (mph (kph)) 21 (33)
Service Capacities  
Fuel tank (gal. (L)) 23 (87)
Hydraulic System  
Total (gal. (L)) 15 (57)
Reservoir (gal. (L)) 11 (40)
Front Axle (gal. (L)) 2 (9)
Rear Axle (gal. (L)) 3 (12)
Engine oil with filter (gal. (L)) 2 (7)
Cooling (gal. (L)) 3 (13)
Operating Weights  
Reference configuration Unit Equipped with ROPS/FOPS cab with heater, standard counterweight, front and rear fenders, full fuel, 165 (75 kg) operator
Reference tires 365/80 R20 Dunlop Tires
Reference bucket 1.4 yd³ (1.0 m³) general purpose bucket w/ Bolt-on-Edge
Operating weight (lbs. (kg)) 13,668 (6200)
With optional counterweight (lbs. (kg)) 13,514 (6130)
Fork weight with V type Coupler (lbs. (kg)) 761 (345)
Forks length (in. (mm)) 47 (1200)
Fork load center (in. (mm)) 20 (500)
Max height below forks (in. (mm)) 128 (3239)
Ground-Fork Clearance @ Max Reach (in. (mm)) 55 (1398)
Payload (80% of FTTL - EN 474-3) (lbs. (kg)) 5011 (2273)
Tipping load - straight (lbs. (kg)) 7372 (3344)
Tipping load - 40° turn (lbs. (kg)) 6266 (2842)
Payload (80% of FTTL - EN 474-3) with add CWT (lbs. (kg)) 5344 (2424)
Tipping load with add cwt- straight (lbs. (kg)) 7950 (3606)
Tipping load with add CWT - 40° turn (lbs. (kg)) 6680 (3030)
Standard Bucket  
Dump angle - fully raised (degrees) 45
Max. rollback: Ground (degrees) 40
Max. rollback: Carry Position (degrees) 45
Max. rollback: @ Maximum reach (degrees) 55
Max. rollback: @ Full height (degrees) 55
Max. back dragging angle (degrees) 61
ISO bucket capacity - Struck (yd³ (m³)) 1.2 (0.8)
Heaped (yd³ (m³)) 1.4 (1.0)
Bucket width - outside (in. (mm)) 82 (2100)
Bucket weight (includes coupler and components) (lbs. (kg)) 926 (420)
Operating load - ISO (lbs. (kg)) 3962 (1797)
Maximum material density - ISO (lbs./yd³ (kg/m³)) 3029 (1797)
Tipping load - ISO: Straight (lbs. (kg)) 9517 (4317)
Tipping load - ISO: 40° turn (lbs. (kg)) 7921 (3593)
Tipping load - ISO: Straight with add CWT (lbs. (kg)) 10,031 (4550)
Tipping load - ISO: 40° turn with add CWT (lbs. (kg)) 8510 (3860)
Operating load with add CWT - ISO (lbs. (kg)) 4006 (1817)
Maximum material density with add CWT - ISO (lbs. (kg)) 3147 (1867)
Lift Capacity: Full height (lbs. (kg)) 8424 (3821)
Lift Capacity: Maximum reach (lbs. (kg)) 10,644 (4828)
Lift Capacity: Ground (lbs. (kg)) 13,746 (6235)
Breakout force with tilt cylinder (lbf. (kgF)) 13,927 (6317)
Loader clearance circle (in. (mm)) 362 (9294)