Danuser T3 Driver

Double tap to zoom

 

Features

The T3 Post Driver is a small driver that delivers big time results!

The T3 Driver will drive T-posts up to a 3" O.D. pipe at a rate of up to six strikes per second. The top of the post is fully contained to prevent kick out and protected from damage by the strike plate. Use your tractor, skid-steer, mini-ex, loader, or backhoe to carry the weight of the driver. This is an ideal post driver for most farmers, ranchers, fencing contractors, and rental yards.

INNOVATIVE

  • Tilt Bracket
    Tilt Bracket option works with all T3 Driver mount platforms for up to 20° tilt either left or right.
  • Strike Plate
    Tilt Bracket option works with all T3 Driver mount platforms for up to 20° tilt either left or right.
  • Skid-Steer Offset Quick Attach Mount
    Skid-Steer Offset Quick Attach Mount allows the operator to drive posts near objects that might obstruct other drivers, like fence lines or debris, and is reversible for use on either side of vehicle.

Specifications

Part ID: 21300 - T3 Driver

Post Dimensions (inches)T-posts to 3" O.D. pipe
Impact Force2,000 lbs. per stroke
Impact Energy40 ft.-lbs. per stroke
Hammer Weight10 lbs.
Strokes per Second6



Mounts Table and DataT3 DriverSkid-SteerSkid-Steer OffsetEuro/GlobalMini-SkidJohn Deere 200-500 Series
Overall Depth (inches)12"14"18"16"17.63"15"
Overall Width (inches)11"45.5"Extendable 50.5" - 86.5"45"37"49"
Overall Height (inches)17"19"19"21"24.5"24"
Weight86 lb.173 lb.286 lb.181 lbs.55 lbs.193 lb.
Hydraulic Requirements1,500 - 3,000 PSI
& Up to 30 GPM*
1,500 - 3,000 PSI
& Up to 30 GPM*
1,500 - 3,000 PSI
& Up to 30 GPM*
1,500 - 3,000 PSI
& Up to 30 GPM*
1,500 - 3,000 PSI
& Up to 30 GPM*
1,500 - 3,000 PSI
& Up to 30 GPM*


* T3 Driver will operate at 6 strikes per second on vehicles with 15-30 GPM. It will function at fewer strikes per second below 15 GPM.